Optionally, you can configure Exalead CloudView to use a Consolidation Server, that will receive documents directly from the Source Connector, and then from the Proxem Connector when the Proxem analysis is complete.
This is useful to save time and avoid waiting for the end of the analysis.
1. Prepare both the Source Connector and the Proxem Connector to use the Consolidation Server:
a. Open the connector, and go to the Deployment tab.
b. For Push to PAPI server, select the Consolidation Server instance on which the connector must push its documents.
a. Go to Data Processing and open your Analysis pipeline, for example, ap0.
b. In the Document Processors tab, for the Discard Document Processor, select Disable processor.
c. Click Apply.
3. Configure the Consolidation Server.
a. Go to Index > Consolidation.
b. Under Aggregation Processors, click Add processor.
c. Select com.dassault_systemes.exalead.processor.proxem.ProxemAggregationProcessor ("Proxem Aggregation Processor")
d. Click Apply.
4. Rescan the impacted sources using the Consolidation Server:
a. Go to the Home page.
b. Under Indexing, click Clear to clear the index (as you have changed the Push to PAPI server property from a build group configuration to a Consolidation Server configuration).