Configuring the Proxem Connector
You can now configure a Proxem connector to index the documents analyzed by the Proxem API.
1. Open the Exalead CloudView Administration Console.
2. Add a connector instance:
a. Go to Connectors and click Add connector.
b. For Name, enter a descriptive name for the connector, for example, proxem.
c. In Creation mode, select either new or copy if you want to copy an existing connector.
d. In the Type list, select Proxem.
e. Click Accept.
3. In the Configuration tab, configure your Proxem connector as required.
Property | Description |
|---|
Proxem base url | URL of the Proxem environment. It must point to the API. For example, https://studio3.proxem.com/production4d/api/v1 |
Proxem project ID | ID of the Proxem project for which you want to index documents. |
Proxem user name | User name to connect to the Proxem server. |
Proxem API key | Specify the key of the Proxem external API. |
Source connector name | Specify the name of the source connector that fetches documents to push them into the Proxem connector. |
Proxem results page size | Specify the number of Proxem documents to show per page. This option has an impact on performance. |
4. Go to the Operation tab and schedule a full scan every 5 minutes.
Note: This step is to make sure that the connector has up-to-date annotations.
5. Click Apply.
6. Go to the Home page, and click Scan for the Proxem connector.
Documents will be indexed only after the first Proxem analysis. This can take time.
You can now configure the Index Data Model.